How To Install Cellular Blinds And Enhance Your Decor?}

Submitted by: Julie Valencia

If you want to learn how to install cellular blinds, it is extremely important for you to understand what cellular blinds are and how they differ from traditional blinds. This article will help you to find out what those blinds are and how you can install them on your windows properly.

Cellular Blinds Defined

This refers to the type of window accessory that is characterized by the honeycombed shape. These types of blinds can be considered as the most energy efficient window covering because the circular compartments that the honeycomb shapes can provide proceeds to trap the air from outside. This way, it will be able to provide natural ventilation from the blinds themselves.

Installing the Blinds

In order to do this properly, you would need to have the following materials:

Your own power drill and bit

Measuring tape


Screwdriver, level, and pencil

Once you gain access to these materials, you will have to follow the subsequent steps to successfully install your Fixed Awnings.

1. First, make sure that youre able to fasten at least two secure brackets on either side of the mount. If you have a wider shade, you should place the brackets equally across the whole width of the sheet itself.

2. Make sure that the brackets will not interfere with the operating mechanisms of your contraption.

3. After this, you can proceed to installing the inside mount by positioning the brackets 1 inches to 2 inches inward from each side of the window.

4. Place it along the top of the window opening.

5. If the window is 3 or more inches deep it would be best for you to place the brackets so that it is 2 inches away from the front window. If your window opening is a bit shallower, decrease the distance about half an inch.

6. You can use at least one screw to stick the brackets to the upper window frame.

7. For the external wall mount, you can center your blinds and remember the bracket locations through simple markings.

8. If you are not going to use a stud, you can use drills to create a hole onto the wall to attach the anchors to. Make sure that the holes are aligned with your brackets.

9. You must secure the brackets onto the wall by drilling holes at the back of the brackets as well.

Additional Reminders

If the bracket is spring loaded, you should be able to hook up the front lip inside the head rails. You ought to rotate the head rail down and inside until the anterior of the head rail clips onto the bracket.

For cord-operated shades, you should pull the cord towards you to release the lock and subsequently use the shade.

To lock the shade, you should pull the cord outward. Be sure that the cords would be placed out of the childrens reach.


If you have cordless shades, look for the handles that are designed to lift the shades up or down. After locating it, clip it into whatever direction you want it to go. You can also clip it to the mid rail if that is how it is designed. If you want to learn more about the different types of Silhouette Shade Blinds Melbourne for the windows, visit Blinds and Shutters as soon as possible.

About the Author: Blinds and Shutters is a dedicated window blinds and Window Shutters website providing the public an easy way to locate a blinds manufacturer, supplier and installer with ease. Visit Here For More Information :


Permanent Link: }

Comments are closed.